Welcome to the Embedded System Solution Hub.
- Overview
- Embedded System Solution Hardware Settings
- Directory structure of Embedded System Solution
- Software Requirements
- Getting Start
- Embedded Solution Platform - RTL
- Embedded Solution Platform - SW
- Linux Boot Up
- Documentation
The Embedded Solution platform is designed to support a diverse range of applications, particularly focusing on vision applications with integrated camera and display design. It is compatible with both Titanium and Trion devices, ensuring flexibility and high performance. Key features include support Triple-Speed Ethernet MAC, providing high-speed Ethernet support. This platform offers a comprehensive suite of applications for embedded software, making it suitable for various use cases. This platform supports both Sapphire SoC as well as High-Performance Sapphire SoC.
- Unified RTL Design: A single, cohesive hardware architecture.
- Broad Device Compatibility: Fully supports both Titanium and Trion FPGA families.
- Comprehensive OS Support: Linux capabilities for Titanium devices (Ti375 & Ti180), and FreeRTOS support across all devices.
- Vision & Display Ready: Includes camera and display reference designs optimized for image processing.
- High-Speed Connectivity: Integrated Triple-Speed Ethernet MAC for rapid data transmission.
- Wireless Enablement: Includes an SDIO Controller to support Linux-based WiFi solutions.
- Extensive Embedded Ecosystem: Provides a wide range of embedded software examples to accelerate system development.
| Category | Documentation | Demo / Status |
|---|---|---|
| Storage | SDIO | Tested for WiFi Solution (br2-efinix) |
| eMMC | emmcDemo | |
| Network | TSEMAC | lwipIperfServer |
| Sensors | Sensors | sensor_PCF8523_rtc sensor_EMC1413_temp |
| Solutions | Solution | cameraStreaming_HDMI cameraStreaming_ETH cameraCapture_mc sd_bmpStreaming_HDMI |
| RTOS | FreeRTOS | iperf, MQTT, EchoServer, FAT |
| OpenAMP | OpenAMP | OpenAMP_Demo |
- Quad 32-bit 6 stages pipelines RISC-V cores
- support RISC-V WIACFD extenstion
- Support RISC-V debug specification with 8 hardware breakpoints
- Support machine and supervisor priviledge mode
- Support Linux MMU SV32 page-based virtual memory
- Dedicated FPLI for each core
- 4 ways 16KB data and instruction caches
- 16KB on-chip RAM
- 24 bits user interrupts
- 1x 256MB of 32 bits AX14 slave interface
- 1x 3.7GB of 512 bits external memory interface
- 1x 128 bits AX14 master interface
- 1x set local interrupt controller and timer
- 1 SD host controller
- 1 MIPI camera + 1 HDMI
- 1 Ethernet
- 1 EMMC
- 2*SPI + 3*I2C + UART + 4 pins GPIO + 2*user timers
Note:
- The resolution of the display is set to 1080p for Ti375C529 device.
- Below are some difference in terms of cpu setting between supported devices.
| Device | System Clk (MHz) | Peripheral Clk (MHz) | Memory Clk (MHz) | Cache Setting |
|---|---|---|---|---|
| Ti375C529 | 1000 | 200 | 200 | 4 ways 16kb I & D caches |
| Ti180J484 | 200 | 100 | 125 | 8 ways 32kb I & D caches |
| T120F576 | 50 | 50 | 50 | 2 ways 8kb I & D caches |
| Device | RX (Mbits/sec) | TX (Mbits/sec) |
|---|---|---|
| Ti375C529 | 923 | 402 |
| Ti180J484 | 298 | 89 |
| T120F576 | 50 | 25 |
The throughput shown below is based on our setup and may vary depending on the configuration and environmental conditions. Values are approximate.
| Device | RX (Mbits/sec) | TX (Mbits/sec) |
|---|---|---|
| Ti375C529 | 75 | 100 |
| Device | XLR | Memory Block | DSP Block /Multiplier |
|---|---|---|---|
| T120F576 | 81614/112128 | 707/1056 | 17/320 (Multiplier*) |
| Ti180J484 | 77670/172800 | 612/1280 | 17/640 |
| Ti375C529 | 81304/ 362880 | 395/2688 | 0/1344 |
+---embedded_sw
¦ +---embedded_solution
¦ +---bsp
¦ ¦ +---efinix
¦ ¦ +---EfxSapphireSoc
¦ ¦ +---app
¦ ¦ ¦ +---fatfs
¦ ¦ ¦ +---lwip
¦ ¦ +---include
¦ ¦ +---lauterbach_trace32
¦ ¦ +---linker
¦ ¦ +---openocd
¦ +---software
¦ +---freeRTOS
¦ ¦ +---common
¦ ¦ +---driver
¦ ¦ +---freertosDemo
¦ ¦ +---freertosEchoServerDemo
¦ ¦ +---freertosFatDemo
¦ ¦ +---freertosIperfDemo
¦ ¦ +---freertosMqttPlainTextDemo
¦ +---standalone
¦ ¦ +---bootloader
¦ ¦ +---common
¦ ¦ +---customInstruction
¦ ¦ ¦ +---customInstructionDemo
¦ ¦ +---driver
¦ ¦ +---emmc
¦ ¦ ¦ +---emmcDemo
¦ ¦ +---fpu
¦ ¦ ¦ +---fpuDemo
¦ ¦ +---gpio
¦ ¦ ¦ +---gpioDemo
¦ ¦ +---i2c
¦ ¦ ¦ +---sensor_PCF8523_rtc
¦ ¦ ¦ +---sensor_EMC1413_temp
¦ ¦ +---perf
¦ ¦ ¦ +---coremark
¦ ¦ ¦ +---dhrystone
¦ ¦ ¦ +---memTest
¦ ¦ +---sd
¦ ¦ ¦ +---sdThroughputTest
¦ ¦ +---smp
¦ ¦ ¦ +---smpDemo
¦ ¦ +---spi
¦ ¦ ¦ +---spiDemo
¦ ¦ +---timer
¦ ¦ ¦ +---clintTimerInterruptDemo
¦ ¦ ¦ +---userTimerDemo
¦ ¦ ¦ +---watchdogDemo
¦ ¦ +---uart
¦ ¦ ¦ +---uartEchoDemo
¦ ¦ ¦ +---uartInterruptDemo
¦ +---tsemac
¦ ¦ +---lwipIperfServer
¦ +---solution
¦ +---cameraCapture_mc
¦ +---cameraStreaming_ETH
¦ +---cameraStreaming_HDMI
¦ +---sd_bmpStreaming_HDMI
+---source
¦ +---submodules
¦ +---cam
¦ +---common
¦ +---ethernet
¦ +---hdmi_display
¦ ¦ +---display
¦ ¦ +---mif_yuv
¦ +---hw_accel
¦ +---usb
-
Efinity 2025.2 [v2025.2]
-
Follow the official documentation on installation process.
-
v2025.2 and above
-
Follow the official documentation on installation process
-
Learn more at the official website
-
Git clone / download from the release.
-
Type command on terminal to switch branch :
git checkout Ti375C529 -
By launching Efinity RISC-V Embedded Software IDE, users are required to import the bsp shown below:
-
Once the BSP is selected, available BSP project can be imported to the workspace.
Note: Please refer List of supported app for different devices.

