Issues

• VRC 720 (SW=0122): Z1ManualTemp missing from 15.720.csv — confirmed working read/write and heating control

  john30/ebusd-configuration#699 · Filter by author lwodniak opened on Oct 12, 2026

• Protherm Puma Condens (BAI00, HW=1303) not matched -> falls back to bai.308523.inc, many registers fail with "invalid position in decode"

  john30/ebusd-configuration#698 · Filter by author aviator1989 opened on Oct 12, 2026

• Fix "invalid position in decode" for SOL00 (auroMATIC 570) with SW=0514

  john30/ebusd-configuration#695 · Filter by author Trapper12 opened on Oct 11, 2026

• Aerotherm Plus no Config for 08 - HMUX0

  john30/ebusd-configuration#694 · Filter by author Catwiesel71 opened on Oct 8, 2026

• 15.700 (also B7S00 / MiPro R): zone short names/labels shorter than the fixed length fail to decode (variable-length NUL-terminated)

  john30/ebusd-configuration#693 · Filter by author rf-dev-lab opened on Oct 7, 2026

• HW5103 / aroTHERM research checkpoint – where to go from here?

  john30/ebusd-configuration#690 · Filter by author MarcelT87 opened on Oct 1, 2026
  16

• VWZIO B512 /0613 state byte / ~495 s no-flow timer

  john30/ebusd-configuration#689 · Filter by author MarcelT87 opened on Sep 30, 2026
  4

• HW5103 B511 /0100 Status00: CompressorState values 21 and 31

  john30/ebusd-configuration#687 · Filter by author MarcelT87 opened on Sep 29, 2026
  8

• HW5103/VWZIO B509: additional flow and hydraulic telemetry registers

  john30/ebusd-configuration#686 · Filter by author MarcelT87 opened on Sep 29, 2026
  3

• HW5103 B509 /5e0d: compressor electrical-load/current candidate

  john30/ebusd-configuration#685 · Filter by author MarcelT87 opened on Sep 29, 2026
  2

• CTLV2 B524 F2-F7: away/absence-mode parameters

  john30/ebusd-configuration#684 · Filter by author MarcelT87 opened on Sep 29, 2026
  1

• B509 /4a0d: possible effective HMU flow-temperature target

  john30/ebusd-configuration#683 · Filter by author MarcelT87 opened on Sep 28, 2026

• B524 group3 /2c: installation-dependent / unresolved controller flag

  john30/ebusd-configuration#682 · Filter by author MarcelT87 opened on Sep 28, 2026
  1

• B524 /b6: unknown flag changing during OHPCF/flexibility action

  john30/ebusd-configuration#681 · Filter by author MarcelT87 opened on Sep 28, 2026

• micro-ebusd fails to initialize eBUS pin configuration (undefined device string) due to NTP/token timeout on Build 20260917

  john30/ebusd-configuration#679 · Filter by author 56peterloos-crypto opened on Sep 28, 2026

• Vaillant UIH00 SW0274 (15.uih.csv): HolidayPeriods field order does not match the device

  john30/ebusd-configuration#677 · Filter by author fgouzi opened on Sep 28, 2026

• Vaillant HMU B507 /010a: cross-generation temperature-envelope candidate

  john30/ebusd-configuration#676 · Filter by author MarcelT87 opened on Sep 27, 2026
  1

• [Vaillant HMU HW5103] B509 refrigerant telemetry registers - cross-installation confirmation wanted

  john30/ebusd-configuration#675 · Filter by author MarcelT87 opened on Sep 27, 2026
  5

• Include the range column in published CSVs with withMinMax

  john30/ebusd-configuration#674 · Filter by author Maddimax opened on Sep 26, 2026

• Triage: small, tested fixes ready for the next merge batch

  john30/ebusd-configuration#673 · Filter by author timemaster5 opened on Sep 25, 2026
  6

• vaillant/08.hmu.tsp: Stat* models (base 0x1a, "*34" prefix) fail with "invalid position" on HMU SW=0129/HW=2204 — raw captures

  john30/ebusd-configuration#672 · Filter by author jlrosende opened on Sep 23, 2026

• duplicate message names break bai.0010043897 load (HW 7603)

  john30/ebusd-configuration#667 · Filter by author TomaszSyc opened on Sep 17, 2026
  1

• Vaillant auroFLOW plus solar station PMS01 (SW0111, HW8502): working register map + proposal for 06.pms config

  john30/ebusd-configuration#666 · Filter by author FUKOO-OD opened on Sep 15, 2026

• Missing / incorrect BAI configuration for Vaillant BAI00 SW=1301 HW=8404

  john30/ebusd-configuration#664 · Filter by author eduardstefany-max opened on Sep 11, 2026

• Protherm 24 KE/14 using the eBUS Adaptor Stick C6

  john30/ebusd-configuration#663 · Filter by author maks1784 opened on Sep 11, 2026